How do I get stealth out clean?

[0808sa]

Anyone have detailed instructions on the best way they found to get stealth into a 10ml vial without making a mess?

[sTaTic]

1. get a 10 ml Syringe
2. get a 20 g needle
3. wash hands and stealth packet (wipe with alcohol)
4. cut open with clean scissors
5. withdraw all from packet into syringe
6. have your vial ready with 2 23g needles in it(one for venting and the other to add gear to the vial)
7. once the syringe is filled, put the cap back on the needle and remove it.
8. screw the syringe into one of the 23g needles and fill the vial.
9. when done, unscrew the 23 g put the 20 g back on and repeat

[0808sa]

Cool thanks

[Machola]

Nice I never thought of the venting.

[lola26]

bump static's post. nice instructions!

[rossalini]

1. get a 10 ml Syringe
2. get a 20 g needle
3. wash hands and stealth packet (wipe with alcohol)
4. cut open with clean scissors
5. withdraw all from packet into syringe
6. have your vial ready with 2 23g needles in it(one for venting and the other to add gear to the vial)
7. once the syringe is filled, put the cap back on the needle and remove it.
8. screw the syringe into one of the 23g needles and fill the vial.
9. when done, unscrew the 23 g put the 20 g back on and repeat

when you unscrew the needle and go to attach to the 23... do you have to tilt the vial up to the syringe?... in other words will the gear leak out of the syringe with no needle on it? thanx...

[sTaTic]

it shouldnt

[ectomatt]

that venting is a great idea but if you got one pin in for the venting thing plus your pin for the syringe and your vial upside down wont you be squirting it all over the floor?? once the oil gets to the tip of the venting pin... i'd do it for sure but not upside down but i could be wrong