Gear Breaking down

[Mighty-D]

I use steatlth gear, I always transfer my gear into a bottle about 10ml or so...

The gear i just recived was test cyp.

This morning I noticed that it was very thick and lumby inside....any ideas whats up?? like it was breaking down.....

I have run the vail under some warm water for a couple minutes and that seems to help it come back together but it stays real thick.

is it okay? I really am worried here. should I use it? I can take it up in the syringe but it seems different. After a day it does it again...it gets real clumpy.

When it comes out of the packet it was fine.




I posted this on another form board but I need to make sure my stuff is okay.

[kawasaki1]

I use steatlth gear, I always transfer my gear into a bottle about 10ml or so...

The gear i just recived was test cyp.

This morning I noticed that it was very thick and lumby inside....any ideas whats up?? like it was breaking down.....

I have run the vail under some warm water for a couple minutes and that seems to help it come back together but it stays real thick.

is it okay? I really am worried here. should I use it? I can take it up in the syringe but it seems different. After a day it does it again...it gets real clumpy.

When it comes out of the packet it was fine.




I posted this on another form board but I need to make sure my stuff is okay.

Alright bro, I noticed your post on the other board and I will respond to that one after this...Now you say that you tried warming the gear up and that didn't help, correct?! Can you do me a favor and post up some pics of what it looks like once it thickens?! Thanks bro.

[Mighty-D]

I put pics up on the other board also.

On the pic that shows the bottom you can really see the clumps.

[Mighty-D]

This bottle was used once with the original contents, I then try to sterilize the bottle and the transfered 10cc into,

[sTaTic]

what was in the vial before? How old were those vials?

[Mighty-D]

Test 250, Blend, 3months old.

[sTaTic]

thats seems weird to me. How did you steralize it? Maybe that had something to do with it.

[juced_porkchop]

careful guy u dotn want to get sick!!!! just order preseald/steril viles there liek 2-3$ each, order like 10 of them n er good for a year or 2 n atleast u dont have to worry .. as for clumps i dont know so im nto gona act like i do sry guy:)

[ejones9501]

WAS BOTTLE DRY AFTER STERILIZATION LOOKS ALMOST LIKE WATER MIXED WITH OIL.

[Mighty-D]

I sterlize the bottle by putting it into the oven for 15 min at 300....I have always done this.

This am. I put the bottle in the sink with really warm water for a few min longer than before....It seemed to worked...It really thinned out and all came back together....

I guess Its okay......I like to understand possible reasons why it may have acted like that but it seems no one knows.

K1 where you at?

[kawasaki1]

I sterlize the bottle by putting it into the oven for 15 min at 300....I have always done this.

This am. I put the bottle in the sink with really warm water for a few min longer than before....It seemed to worked...It really thinned out and all came back together....

I guess Its okay......I like to understand possible reasons why it may have acted like that but it seems no one knows.

K1 where you at?
I have not seen this problem before, but would a agree with ejones that it almost looks like water mixed with the oil?! Personally, I would continue to heat it as you are doing and after the vial is empty I would trash it and get some new ones!!

[sTaTic]

Well, I wouldn't even suggest useing that. That's just me though

[Mighty-D]

But HOW would water get into the vail??? I handle my stuff with care...UNLESS water is in the sachets for heat????during shipment??


I used it today and it seemed like any olde day

[kawasaki1]

But HOW would water get into the vail??? I handle my stuff with care...UNLESS water is in the sachets for heat????during shipment??


I used it today and it seemed like any olde day

I'm not sure bro, but I have not had ANY problems with any of the sachets I've gotten?! I'm stumped on this one??!

[BigRaf]

The reason you have clumps is because your re-using old vials, with odd and un-effective sterilization techniques. You should only use sterile new vials, it's cheap to purchase. By the way when you tried to sterilize in the oven did you take the rubber stopper off? Then re-crimp it with a new one?

[Mighty-D]

The reason you have clumps is because your re-using old vials, with odd and un-effective sterilization techniques. You should only use sterile new vials, it's cheap to purchase.

ODD??? From what I know, thats how I was told....I think even this site here is was I learned it From ALIN his self had it posted at one time on is order page! and the vail wasnt that old, I just finished what was in their when my order came in.




By the way when you tried to sterilize in the oven did you take the rubber stopper off? Then re-crimp it with a new one?

NO i vented it with a pin.

I do agree vails are cheap to get. As I posted in another form board, I purchased some.