View Full Version : How to get oil out of stealth packs
jtsunami
02-23-2007, 01:16 AM
Do I stick the needle through the package and extract it, or do I rip off a corner and put the needle in that way and extract it into the plunger?
bigpumpin37
02-24-2007, 07:06 AM
yea some say to swab the top corner of one side then stick needle in and suck it up and some say cut a piece of the corner off then suck it up... get some sterile sealed vials if possible
lhgixxer
03-03-2007, 09:07 AM
I poked a hole no biggie they are over filled they say 5ml but I bet there are 6mls in each gotta love alin/stealth
broch landers
03-04-2007, 06:10 AM
I bought a good amount of stealth and to extract it I'm using 18 gauge needle and a 10cc syringe. then I bought a bunch of sterile vials to store them in
Cracker
03-04-2007, 02:44 PM
I bought a good amount of stealth and to extract it I'm using 18 gauge needle and a 10cc syringe. then I bought a bunch of sterile vials to store them in
there ya go buddy...:)
SwoleTexasKid
03-05-2007, 12:10 AM
Man I still say that the easiest way to do it is cutting off a tiny corner of the satchet, pulling off a plunger on a needle, pouring it in the back of the syringe, then replunging it. This way you dont have to pull it out of some coffee cup, who knows how much you will lose this way or whats on the surface of that cup.
And as for taking the ten years to poke the packet and draw it up that way, I dont have the time or patience for that. My method pulled out 5 1/2 ml out of each satchet.
alibabbleon
03-10-2007, 04:51 AM
Man I still say that the easiest way to do it is cutting off a tiny corner of the satchet, pulling off a plunger on a needle, pouring it in the back of the syringe, then replunging it. This way you dont have to pull it out of some coffee cup, who knows how much you will lose this way or whats on the surface of that cup.
And as for taking the ten years to poke the packet and draw it up that way, I dont have the time or patience for that. My method pulled out 5 1/2 ml out of each satchet.
gotta give you this one, even though I'm down now with my liver, I read how you do it so I tried the back of the syringe deal, short of dripping some my first time, God I love that scent, it was a hell of alot quicker. Therfor Ive changed my ways.. Thanx for the info.:cool:
Tyrone
03-10-2007, 06:04 AM
gotta give you this one, even though I'm down now with my liver, I read how you do it so I tried the back of the syringe deal, short of dripping some my first time, God I love that scent, it was a hell of alot quicker. Therfor Ive changed my ways.. Thanx for the info.:cool:
Isn't there good potential to push oil out the end when putting the plunger back in...Never done it this way but I woul have to think so at least the very first part of putting the plunger back in...
SwoleTexasKid
03-13-2007, 01:12 AM
Hey Tyrone, a couple drops come out of the end but I fill the thing to 3 1/2 cc and so I basically just have to barely put the plunger in the back bc there is no room anyway, just enough so its secure, and a drop or two will come out the needle from the pressure. No big losses though.
And I do it all over a coffee mug actually, I incorporated the other method in this thread, so just in case I do spill some it pools up in there and I can salvage a little.
vBulletin® v3.7.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.