stealth hygineb

[viczeva]

hey guys,

ive got some stealth test e, and ive been doing the following. i take all the 5ml out of the sachets in two different 3cc syringes. and store them in the syringe till use. i inject 1 cc ta time.
My question is as follows.. when u inject and aspirate, and the blood or w.e. gets in the syringe. wont the test that is left in the syringe get contaminated? will it go bad by the time i do the next shot? is there a high risk of infection if blood gets in the syringe and i leave it in? doesnt seem to be too hyginic, what r ur thoughts?
vic

[West_Bank]

Hey Viczeva,

Hey Bro don't you mean aspirate then inject? I would think you would have a chance of contaminating the remaining product if you pull back on the plunger after injecting. Would'nt you aspirate before injecting to see if you have hit a vessel and you pull push the product therfore pushing any contaminates back out of the needle..right??
:confused:

[rAJJIN]

hey guys,

ive got some stealth test e, and ive been doing the following. i take all the 5ml out of the sachets in two different 3cc syringes. and store them in the syringe till use. i inject 1 cc ta time.
My question is as follows.. when u inject and aspirate, and the blood or w.e. gets in the syringe. wont the test that is left in the syringe get contaminated? will it go bad by the time i do the next shot? is there a high risk of infection if blood gets in the syringe and i leave it in? doesnt seem to be too hyginic, what r ur thoughts?
vic


Are you saying that you use the Same syringe to inject with more then
one time? Very Bad idea, I hope Im misunderstanding.

If your going to store it in pins...Shoot it ALL at once and throw away!
Dont try to re-use.

[paulwigan]

you are risking some crazy shit there.

[Tyrone]

hey guys,

ive got some stealth test e, and ive been doing the following. i take all the 5ml out of the sachets in two different 3cc syringes. and store them in the syringe till use. i inject 1 cc ta time.
My question is as follows.. when u inject and aspirate, and the blood or w.e. gets in the syringe. wont the test that is left in the syringe get contaminated? will it go bad by the time i do the next shot? is there a high risk of infection if blood gets in the syringe and i leave it in? doesnt seem to be too hyginic, what r ur thoughts?
vic
If you inject deep enough into the glute the right way it should be unlikely to aspirate and draw blood. However you could still nick one on the way in or on the way out and get blood in the pin/syringe. This is why you should not reuse either pin/syringe.
I read a post about warming up the stealth sachet with a warm wash cloth. Then to cut the corner off and let it pour into a vial and then drip the last remaining contents. This is to get all the stealth product. The only problem is that there is still the chance of contamination because you have to remove the top of the vial. I am about to use this method but I will make sure the surrounding environment is as close to sterile as possible and that there is no air movement i.e. fans blowing. Things should be fine. After all, the sachet itself would be open anyways in order to draw from right?

[rAJJIN]

If you inject deep enough into the glute the right way it should be unlikely to aspirate and draw blood. However you could still nick one on the way in or on the way out and get blood in the pin/syringe. This is why you should not reuse either pin/syringe.
I read a post about warming up the stealth sachet with a warm wash cloth. Then to cut the corner off and let it pour into a vial and then drip the last remaining contents. This is to get all the stealth product. The only problem is that there is still the chance of contamination because you have to remove the top of the vial. I am about to use this method but I will make sure the surrounding environment is as close to sterile as possible and that there is no air movement i.e. fans blowing. Things should be fine. After all, the sachet itself would be open anyways in order to draw from right?


youll be Fine Tyrone. Its No differant then breaking the top off of an ampule
and drawing from it.... same situation it exposed briefly to the 'air'.

[sTaTic]

why not pull from packet and shoot into an empty vial? What are you thinking? Empty vials are a buck or 2. I pulled 11 packets of EQ out and put them in 3 seperate 20ml vials. What are people thinking these days? :eek:

[Tyrone]

why not pull from packet and shoot into an empty vial? What are you thinking? Empty vials are a buck or 2. I pulled 11 packets of EQ out and put them in 3 seperate 20ml vials. What are people thinking these days? :eek:
Some one just posted that this is what they did to avoid any loss of product. Haven't opened my stealth yet (waiting on some more pins) so have no idea how much I will be able to draw exactly.

[sTaTic]

every stealth packet I had was over 5 ml

[Kaiser]

why not pull from packet and shoot into an empty vial? What are you thinking? Empty vials are a buck or 2. I pulled 11 packets of EQ out and put them in 3 seperate 20ml vials. What are people thinking these days? :eek:

Order yourself up some syringes and vials from sterilesyringes.com and use one syringe per shot. A cheap way to keep yourself from infections.

[robbieg]

every stealth packet I had was over 5 ml


Amen to that :D

[Tyrone]

every stealth packet I had was over 5 ml
Then what are some of these guys talking about then? I will do the first sachet and see how it goes with your way bro.

[Tyrone]

Order yourself up some syringes and vials from sterilesyringes.com and use one syringe per shot. A cheap way to keep yourself from infections.
Already did that but thanks Kaiser. Just waiting for them to arive.

[1scuba]

I draw the necessary amount into as many pins as needed, use once and throw away.

[sTaTic]

Then what are some of these guys talking about then? I will do the first sachet and see how it goes with your way bro.

maybe they aren't getting the product out correctly. I dont know why they would be coming up short. Like I said, every packet had more than 5 mls. I think one even had a little over 6mls

[Tyrone]

maybe they aren't getting the product out correctly. I dont know why they would be coming up short. Like I said, every packet had more than 5 mls. I think one even had a little over 6mls
Good to hear bro. I will def. do it your way first and see how it goes. You always give great info. After seeing how that works, I might run a personal test.