PDA

View Full Version : Chemical Question


The BB Monad
05-26-2008, 05:24 PM
I don't know if this has ever been posted on here but today was my 9th Sust/Eq shot.

I've been following the advice on here and warming up the oil in the syringe under a hot tap for 1-2 minutes before pinning.

The problem is all the other times I used to get my shots done by a nurse without warming and in the glutes I had better gains by now.

So this got me wondering if warming up the oil to long can in fact change something in the chemical composition of the AAS. Anyone knows the answer?

I don't really think it does but I'm just curious because today I start the 5th week and I should have put on more weight by now so are my receptors just getting a little burnt out or something?

Thank you all!

Ed17447
05-26-2008, 05:27 PM
yeah, you can damage the hormone if its too hot, but it would have to be so hot that you can't inject it I would think.

Machola
05-26-2008, 05:45 PM
bump ed. don't worry if its just hot tap water

jjgonz
05-26-2008, 09:02 PM
your tap water doesnt get hot enough from my understanding..i only run it under water for about 10 seconds anyway so i dont know and how long ago was your last cycle and how big was it...that could have a lot to do with it..some people need more time off than others bro

lola26
05-26-2008, 09:19 PM
bump ed. i was told anything over 250-275 degrees can start to compromise the hormone chain.

ojs
05-26-2008, 10:16 PM
Tap water isn't going to be hot enough to mess anything up.

ironfreak83
05-26-2008, 10:45 PM
so what about people who have had test C crash, and hafta heat it up to get it mixed back up again?

not trying to hijack your thread monad, just seemed like it kinda fit here.

ROCK157
05-27-2008, 08:03 AM
Like heating up any oil, the solution will disolve faster. You would have to actually burn it to change anything. Hot water is not hot enough to burn.

Alin
05-27-2008, 06:00 PM
yeah, you can damage the hormone if its too hot, but it would have to be so hot that you can't inject it I would think.

most AAS can withstand some high temps without ruining. It would have to be some obviously high temps.

jjgonz
05-27-2008, 07:35 PM
so what about people who have had test C crash, and hafta heat it up to get it mixed back up again?

not trying to hijack your thread monad, just seemed like it kinda fit here.

good ? got me wondering about this as well