question on home brew

[ironfreak703]

whats up bro's.. just got a question on home brews... if u have home brewed test E please PM me.. i have all the melting point data, and instructions.. and i have made prop and tren befor.. just have to see if the process is any diffrent.. the instructions i have seem to make it sound more difficult than it really is.. thanks

[lunny]

Oh god here we go....... :)

[ironfreak703]

whats that meen lunny??? i have made prop and tren.. but in the instructions i have they tell u to bring the powder to its melting point befor u mix it in the BA.. that doesnt sound right.. why couldnt i just mix the powder in the BA and do my steps from there without melting the powder??? that is why i am confused bro

[Alin]

whats up bro's.. just got a question on home brews... if u have home brewed test E please PM me.. i have all the melting point data, and instructions.. and i have made prop and tren befor.. just have to see if the process is any diffrent.. the instructions i have seem to make it sound more difficult than it really is.. thanks

basskilleronline used to have good instructions.

[Ed17447]

you have to melt it so it will suspend in the oil.

[ironfreak703]

k this is what i got on the conversion.. it says u heat if nessisary... and i have all the melting points for the powders... just this is why i am confused

Test Cypionate 10 gram conversion

Needed
10 grams test c
2ml Benzyl Alcohol = 5% BA
30.5 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 gauge needles
mixing Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 10 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though Whatman filter.
10. Take other syringe with 2ml oil, run through Whatman into solution.

Makes 40ml @ 250mg/ml

[zznwhs]

k this is what i got on the conversion.. it says u heat if nessisary... and i have all the melting points for the powders... just this is why i am confused

Test Cypionate 10 gram conversion

Needed
10 grams test c
2ml Benzyl Alcohol = 5% BA
30.5 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 gauge needles
mixing Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 10 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though Whatman filter.
10. Take other syringe with 2ml oil, run through Whatman into solution.

Makes 40ml @ 250mg/ml

They are saying heat if necessary in case the oil cools off and the powder doesn't completely dissolve in the oil. In that case you would need to heat the oil a little more, and all the powder will dissolve and suspend in the oil.

[ironfreak703]

got it... ya i found a good link while i was just searching... says to heat the beaker with a blow dryer.. sounds like that would get hot enough.. thanks bro's

[tdizzle28]

Wow did this give me a headache...I'll just keep ordering from Alin. I don't mind paying retail without the headache. :D:D:D

[jjgonz]

home brews kinda scare me :(

[newguy666]

that doesnt look like it would hard to make.

test c at 10g for $30 + cost of supplies.... overhead for 40ml is what... $60-$70?

[ironfreak703]

they have it out there.. usually dosed around 50mg.. i heard it is the worst shit u can put into ur body... i guess because of how painful the injections are.. not sure of the actuall chemical name but im sure someone else will chime in

[wistrongman]

I can see how Alin may be offended by such a thread, because he is trying to sell his products via his website. However, not all of us can afford pre-made AAS. Due to personal reasons on the homefront, money IS an issue for me, and I would not be using AAS if I didn't have access to my powder source.

Every product I've used has come in powder form and was brewed in my kitchen. This includes the test p, tren a, and anavar cycle I'm currently on. There is no way I could afford this cycle if I bought it pre-made. Even my PCT is in oral dropper bottles. I even bought anavar powder and made my own capsules.

If you have the time and patience to put into making it, it's worth in the long run for some people. For those of you who feel homebrewing is too risky, and can afford the pre-made AAS, by all means continue to keep Alin in business! We're not all in the same boat financially, so we all take different routes.

I hope this doesn't offend anyone.

[steak]

I struggle financially too, and its hard to get ready for a show. Alin is cheap though, but the % they charge for money transfers at WU etc. is high.:(

[The BB Monad]

I prefer the local pharmacies and Alin by far... No way I'm ever getting into the homebrewing thing.

[Ed17447]

I prefer the local pharmacies and Alin by far... No way I'm ever getting into the homebrewing thing.
your lucky, I wish I could just walk into the local pharmacy and grab some organon. we can't buy ephedrine based cold meds here without signing for it.

[tdizzle28]

I can see how Alin may be offended by such a thread, because he is trying to sell his products via his website. However, not all of us can afford pre-made AAS. Due to personal reasons on the homefront, money IS an issue for me, and I would not be using AAS if I didn't have access to my powder source.

Every product I've used has come in powder form and was brewed in my kitchen. This includes the test p, tren a, and anavar cycle I'm currently on. There is no way I could afford this cycle if I bought it pre-made. Even my PCT is in oral dropper bottles. I even bought anavar powder and made my own capsules.

If you have the time and patience to put into making it, it's worth in the long run for some people. For those of you who feel homebrewing is too risky, and can afford the pre-made AAS, by all means continue to keep Alin in business! We're not all in the same boat financially, so we all take different routes.

I hope this doesn't offend anyone.

I can understand that, just the chemistry and all confuses me to no end. I grew up in a town of about 1000 people and the education I got is probably one of the worst in the country so stuff like that is just way over my head. Now if I had someone sit down and show me once or twice, I would remember it forever...got a weird sense of memory like that, but reading it and applying it, I would be lost.

[wistrongman]

I can understand that, just the chemistry and all confuses me to no end. I grew up in a town of about 1000 people and the education I got is probably one of the worst in the country so stuff like that is just way over my head. Now if I had someone sit down and show me once or twice, I would remember it forever...got a weird sense of memory like that, but reading it and applying it, I would be lost.

Yeah, I was nervous at first. But, I was fortunate enough to have a friend who's been doing this for years. He took me step-by-step through the process, and I wrote eveything down. The more you do it, the easier it becomes.

Again, this is just my personal preference. We all take different routes.

[cpesloco]

Brew sounds good to me i like doing shit like that. maybe one day i will try it.

[Elderly1]

Home-brewing is kind of fun, and gives you a sense of accomplishment to boot!
It is a bit time consuming, so I don't do it often. But there is real savings to be had.

Tren-A, for instance, is probably the simplest to make up on your own and it seems like a good place to start. I think my first batch was just under 40ML (@100mg/ML) and cost less than $100 all told.

I'd probably brew more if I had the time....but it certainly is much more convenient to purchase quality products in their 'ready-to-use' state

[Hockey265]

I've been wanting to try some home brew for awhile but I'm always worried the information I get about brewing it is wrong. Even if I did brew my one stuff though, I would still shop with Alin for the convienence.

[ironfreak703]

this thread was in no way started to offend alin.. in fact he answered my question.. yes this is alin's board.. but it is an information board none the less... im home-brewing because i think it is fun.. gives me somthing to do.. and when u get gains off ur own gear it is even better because u know that u made what u are growing off of.. that u did it yourself... i still order from alin... i cant make winni injectable.... or any type of sust or ST... just brewing up the simple stuff

[LeanMass17]

Iron Freak Labs....its got a nice ring to it

[schutzhundk9]

I homebrew tren but nothing else. I bought some synovex once (test Prop) but never got around to converting it. Frome a $$ perspective it makes sense to home brew. Also - knowing exactly what you have in there is priceless. That said - I trust Alin and his product line but would homebrew before trying many others.

[rAJJIN]

If your going to do something Like that I sure dont reccomend getting Caught!!! You need to always worry about your freedom and the risks involved in your choices.
Theres plenty of up sides and down sides to Human grade Vs UGL.
I tell you what though as far as Saftey,Health and Risks Involved The Human grade is Hands down THE BEST CHOICE.

Be smart guys. Some of the details posted here are Crazy! When you guys get older youll understand better.

[lunny]

If your going to do something Like that I sure dont reccomend getting Caught!!! You need to always worry about your freedom and the risks involved in your choices.
Theres plenty of up sides and down sides to Human grade Vs UGL.
I tell you what though as far as Saftey,Health and Risks Involved The Human grade is Hands down THE BEST CHOICE.

Be smart guys. Some of the details posted here are Crazy! When you guys get older youll understand better.

Yeah but wheres the fun in ordering??? Come on not knowing if you cooked out all the impurities... Or if that powder you got is really test and not flour!!!! That just gives you such a rush!!!!!!! :D:D:D:D:D lol.........

I will stick with the mail....

[ironfreak703]

wish me luck boys.... i am not making this for selling puposes.. just as an experiment and i will be throwing it away... i dont sell AAS nor will i.. just like to do a lil chemistry experiment

[Hockey265]

wish me luck boys.... i am not making this for selling puposes.. just as an experiment and i will be throwing it away... i dont sell AAS nor will i.. just like to do a lil chemistry experiment
Bullshit your goin throw it away. Why would you do that? The whole point of home brewing is to use your gear. How the hell you goin know if its any good? You think there are people who grow weed and blow saying their goin throw it out after its made? Hell no they dont, and neither will you. Just cause this is alinboard doesn't mean you can't talk about home brewing. I don't think Alin is to concerned about all his customers turning into little AAS chemists. Be proud of what your doing. Just don't be stupid and get caught selling it.

[ironfreak703]

IM THROWING IT AWAY BRO!!! U TRYING TO GET ME INTO TROUBLE???

[rAJJIN]

IM THROWING IT AWAY BRO!!! U TRYING TO GET ME INTO TROUBLE???

hahaha, No shit! Let the guy throw it away:)

[ironfreak703]

just doing an experiment.. all of the chems and supplys are for research purposes only... I AM THROWING IT AWAY GOALIE.. im sure u can respect my desision

[sinner6]

wish I knew where to get the material (wink wink)

[mccollumstacy]

wish I knew where to get the material (wink wink)

No disrespect bro - but no sourcing info on this board. We'll help you find quality protein, supps, legal goods - but I don't think any of the regs of this board are going to post a source for raw materials. Now - if you have a buddy on this board and you two want to pm ea other - get jerk happy bud - but don't post on the open board. Thanks

[Hockey265]

just doing an experiment.. all of the chems and supplys are for research purposes only... I AM THROWING IT AWAY GOALIE.. im sure u can respect my desision
You can do whatever you want with it. BUT, I have a feeling that when its all said and done your goin want to test it out. I know I would. Besides, how you goin know what you actually made unless you try it? I guess you could buy a kit and test it out to see if its good. Anywayz, best of luck with the brew. Let us know how it turns out.

[tdizzle28]

You can do whatever you want with it. BUT, I have a feeling that when its all said and done your goin want to test it out. I know I would. Besides, how you goin know what you actually made unless you try it? I guess you could buy a kit and test it out to see if its good. Anywayz, best of luck with the brew. Let us know how it turns out.

Hoc said that is fine if you throw it out, just let him know where you live and don't mind any late night noise you hear from someone rumbling through your trash! :D:D:D

[ironfreak703]

hey once my trash is out it is up for grabs... i live in an area that is right around the corner from an actual poverty area... u would be suprized how many people i actually see going through the trash.. however i dont think its juice they are looking for..