mjfink
03-06-2006, 02:56 AM
I am really excited to try the new Stealth labs stuff; but I have a quick question. I am currently using ST450 from IP (which I got from Alin, many props for the whole ordering and delivery process!) and I just wonder if it will be possible to get the Stealth Labs 450 though a small pin (23G) without mixing another oil in? Is the Stealth Labs 450 as thick as the ST450 from IP? Because if so, there is probably no way I am going to get that through a 23G needle. Right now I mix the ST450 with EQ, and that works pretty well, but is getting on the edge of injectability for that size pin.
If its not possible, and I need to put another oil in, how do you suggest that we do this? I was thinking that I could preload a few darts out of the sachets? For example, put the needle into the sterile package, pull out 1ML of ST, then connect the syringe to another package (that already has a needle in it) and pull out 1ML of another oil? That way I could load 5 needles at one time (loading each with 1ML of ST450 and 1ML of EQ). Is that the suggested procedure?
Also, I would like to comment a bit on the IP labs bulk oils that I have used. I have been generally very happy with them, but I did start to get a problem with a minor fever and chills the day after my injects. I thought it was a problem with the gear, but then I figured out what it really was. The bulk containers that I put them into (50ML containers with rubber stoppers) had started to deteroriate, and the rubber was leaving tiny little particles in the gear, that I was sucking up and injecting. Once I figured this out, I just started to filter the gear on they way into the syringe.. Volia! No more chills the next day. I would hazard a guess that this has happend to lots of people who report bad results with IP gear, you probably are contaiminating in in the sterile vial just like I was.
Thanks again Alin!!
If its not possible, and I need to put another oil in, how do you suggest that we do this? I was thinking that I could preload a few darts out of the sachets? For example, put the needle into the sterile package, pull out 1ML of ST, then connect the syringe to another package (that already has a needle in it) and pull out 1ML of another oil? That way I could load 5 needles at one time (loading each with 1ML of ST450 and 1ML of EQ). Is that the suggested procedure?
Also, I would like to comment a bit on the IP labs bulk oils that I have used. I have been generally very happy with them, but I did start to get a problem with a minor fever and chills the day after my injects. I thought it was a problem with the gear, but then I figured out what it really was. The bulk containers that I put them into (50ML containers with rubber stoppers) had started to deteroriate, and the rubber was leaving tiny little particles in the gear, that I was sucking up and injecting. Once I figured this out, I just started to filter the gear on they way into the syringe.. Volia! No more chills the next day. I would hazard a guess that this has happend to lots of people who report bad results with IP gear, you probably are contaiminating in in the sterile vial just like I was.
Thanks again Alin!!