Sterilization

[huskerfoos]

Since A's site is down, I can't seem to find the instructions to sterilizing gear. Does someone have a copy of that, and if so, could I get a copy of that? I somewhat recall some, if not most, of the process, but as far as materials need, i am unsure of.

I can't find it on this site anywhere, if it is on here, may I be directed to that thread?

thanks
JJ

[tomcat724]

Since A's site is down, I can't seem to find the instructions to sterilizing gear. Does someone have a copy of that, and if so, could I get a copy of that? I somewhat recall some, if not most, of the process, but as far as materials need, i am unsure of.

I can't find it on this site anywhere, if it is on here, may I be directed to that thread?

thanks
JJ

His new site is up but the info your looking for isnt posted yet.. But from what I can remember from when I used them was , you need 10cc sterile vials, .45 or .20 whatman filters 1 for each vial a 10cc syringe and enough pins to transfer from the jug to the vial and then another set to vent them when you bake it... you bake them on a cookie try at 250 degrees for about 20 min or so... if you use a .20 whatman filter its a little tougher to use. But some have recommended them on here to catch more bacteria then the .45..... hope this helps you out a little bit.... the new site is www.easysteroids.com

[johnhazelair]

question, can i use the one filster i got for my last 6 injects? thanks bro oh i have the .45u....

[tomcat724]

well personally i wouldnt reuse a filter , to me that kinda defy's the point of it.. plus why would you use it for an injection..? the gear you have should already be sterile , i know its better to be safe then sorry but thats a little over kill.. what you could do is just filter your last 6 injections all at once if you have a sterile vial thats big enough to hold the amount of ml's it comes out to be.... then theres no worries

[johnhazelair]

ok i started to use the filter and white stuff started going into the needle?

[huskerfoos]

I have 3, 50cc bottles, all different kinds. Is it ok to use a different filter for each kind, or should I use more?

JJ

[nj321f]

for what you have so many sites that sell over 600 pc gear for just 20$

[huskerfoos]

NJ, are you were refferring to me? If so, I have no idea what you just said. Can you clarify your statement

[nj321f]

dear huskerfoo ,
Yes i was replying to you , There are many sites that sell big bag fulls of syringes for around 20$ as far as sterilazation its really not worth it being that they are so cheap. I dont know your budget so please dont take this wrong. But i just want to make sure you dont get sick. Its pretty nasty if you get sick of a dirty needle even if its your own, You can get a staff infection and worse.
hope this helps if you want the links to some sites that sell cheap needles let me know, Or next time i get the huge bags ill give you a couple of bags free i dont need that many just pay shipping.
be well

[mickeymbbc]

Bump NJ32: Better safe than sorry:


-mick

[huskerfoos]

I wasn't reffering to using the same needles. I already have about 50 syringes and have more on order. I was just asking about FILTERS. How many filters do you guys recommend? Obviously, at the minimum, I need 3, because I have 3 different types of gear.. But, my question was , How many do I actually need? I am thinking of depositing each bottle into a 30cc vial, and a 20cc vial.

JJ

If I misunderstood you NJ, I apologize, but you stated syringes, and that is all you mentioned.

[White Knight]

ok i started to use the filter and white stuff started going into the needle?

Are you using whatman filters to draw with? I believe they are intended for pushing through, not for drawing through. I.e. you would pull up your gear and then push it through the filter into a sterile vial...

WK

[tomcat724]

bump to white knight,

they are infact ment to be used to push the gear through and not drawn through.. and to answer your question husker you want a filter each time you push gear through.. ie-- if you were using a 10cc syringe for a 30cc vial you need 3.. you might get away with using a filter twice but i wouldnt use it more then that.....

[mickeymbbc]

One time use is safer, its not like they are expensive anyway.


-mick

[nj321f]

hey just wanted to say yeah i totally misunderstood you i thought you were speaking of needles. Now i have a ? then you guys are talking about filtering through a needle when you draw your roids into it :confused:
I usally just draw straight back from the ampule into the needle, Is there any reason you do use a filter ??
Just want to know incase iam doing something wrong. Or am i totally freaking confused here :p
be well
thanks nj


I wasn't reffering to using the same needles. I already have about 50 syringes and have more on order. I was just asking about FILTERS. How many filters do you guys recommend? Obviously, at the minimum, I need 3, because I have 3 different types of gear.. But, my question was , How many do I actually need? I am thinking of depositing each bottle into a 30cc vial, and a 20cc vial.

JJ

If I misunderstood you NJ, I apologize, but you stated syringes, and that is all you mentioned.

[tomcat724]

you dont need to filter "brand" gear since its already sterile... he was asking on what to do with the ip bulk oil... and you only use the filter to place oil into a vial you dont draw with a filter , its not meant to be used that way... i made the mistake once on doing so and i had a film in the syringe , needless to say i wasted a $5 filter too...lol damn things are way over priced....lol

[huskerfoos]

ok. thanks for the replies guys. i am just needing to get on the ball and get started.

jj