View Full Version : post injection leaking
supermanssidekick
11-08-2007, 10:17 AM
hey im 5'8 165lbs 13% bf
right now i am taking mast, test prop eod and eq twice a week. everytime i inject in my shoulder it leaks out. the syringe is only about 2.5cc full when i inject and after i inject all of it in my shoulder i hold it in for 10 sec but when i pull out my shoulder starts leaking. is there anyway to stop this?
DEADBOLT
11-08-2007, 10:22 AM
how long of a pin do you use? if you heat up the oil it almost always leaks out. Also if you inject really slow and wait about a minute after the injection is done before pulling out it probably wont leak.
musclemd
11-08-2007, 10:22 AM
Use 1 1/2 length pins into the Glutes. Why are you doing the delts? The glutes hold more.
DavidYork
11-08-2007, 10:48 AM
I made a post about this exact same subject recently. I figured out that my problem was even after leaving the pin in 10 - 20 seconds, I was whipping it out too fast. If you draw it out REALLY slowly, you don't get any leakage... At least I don't.
InkFiend33
11-08-2007, 10:49 AM
I stretch the skin before i pierce. then when i pull out the skin closes up faster. no leaks..
grizzlylongcut1
11-08-2007, 10:51 AM
2.5 cc seems like alot to go in the shoulder,i personally only like 1cc or so in shoulder,use glutes, quads, hip shot for the the bigger shots,
DEADBOLT
11-08-2007, 10:57 AM
I stretch the skin before i pierce. then when i pull out the skin closes up faster. no leaks..
that's proper techniqe. I ate pulling it out when it's like that!
danneh
11-08-2007, 06:33 PM
After you've pulled the pin out slowly, press gently on the injection site with a alchohol swab. I just reuse the one I used to clean the site before the injection.
metalcavy87
11-08-2007, 08:06 PM
I stretch the skin before i pierce. then when i pull out the skin closes up faster. no leaks..
This is what I do as well. Works 'cause the hole in the skin and the hole in the muscle do not line up perfectly. Bumpage
gruvi
11-09-2007, 05:53 AM
Most likely too much to inject in the shoulder. Go it in the glutes, more muscle, less pain and make sure you're injecting into the muscle.
lunny
11-09-2007, 06:45 AM
What gauge of pin you using??? I was having this problem for awhile when i was using a 22. Then took some advice and got 23's Not a prob since. You might be injecting to fast bro!!!! when you inject to fast the oil doesnt have time to disperse. Then no matter how slow you pull out the oil will follow because of the pressure build up. This is why 23's help cause you have to go slow due to the smaller pin....oh and as far as CC's into the delt!!! i wouldnt go above 2
supermanssidekick
11-10-2007, 10:59 AM
i am using 23 gauge 1 1/4. i was trying to rotate between my delts and my quads because they were eod injections but i think i will just rotate between my glutes and my quads. i tried pulling the skin back thing and pullin out slowly and that worked great so thanks guys.
johnny1592468
11-10-2007, 11:02 AM
2 and half cc's in the delt is too much.
leopoldbloom
11-10-2007, 01:04 PM
I would keep shoulder injections at a MAX of 1.5 ccs. 2cc's is too much, imo, even if you do have big shoulders. Also, I believe you will get the best results by rotating injection sites. So, maybe divide your shot up and shoot each delt, or perhaps take it all in the glute or thigh. Either way, dont shoot the delts all the time. Inject into muscles only what they are known to be capable of holding well.
lunny
11-10-2007, 05:19 PM
I would keep shoulder injections at a MAX of 1.5 ccs. 2cc's is too much, imo, even if you do have big shoulders. Also, I believe you will get the best results by rotating injection sites. So, maybe divide your shot up and shoot each delt, or perhaps take it all in the glute or thigh. Either way, dont shoot the delts all the time. Inject into muscles only what they are known to be capable of holding well.
You must have some small ass shoulders cause i can pump 2cc easy!!!! Its all about how slow you inject!!!!!
golden_arm
11-10-2007, 07:10 PM
I exclusively pin quads and glutes, they can hold a shitload of gear, alot more than delts. Why would you choose to rotate between quads and delts over quads and glutes, just out of curiosity?
lunny
11-10-2007, 07:28 PM
I rotate glutes and delts for 2cc shots then for 1cc shots i pin traps and lats! (well my girl does)
golden_arm
11-10-2007, 09:54 PM
i am using 23 gauge 1 1/4. i was trying to rotate between my delts and my quads because they were eod injections but i think i will just rotate between my glutes and my quads. i tried pulling the skin back thing and pullin out slowly and that worked great so thanks guys.
oops, missed this when i posted my comment. personally glutes are my fav, i can slam 3ccs in there eod no problem, probably more but i stick with 3ml syringes so dunno
vBulletin® v3.7.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.