inject delt/23g 1 1/4?????????

[swing lo]

Guy's I have been injecting in the quads with no pain and no problem with a 23g 1 1/4

Will a 23g 1 1/4 work in the delt's or is that needle to long. If it's going to be a problem I'll just keep alternating into my quads.

Let me get some feedback guys.

[lola26]

you can use it just insert only 1/3-1/2 way. imo i would get 25g 1". also if you have lean quads, use this same protocal.

[swing lo]

what would happen if I went all the way in with the 1 1/4? My delt are not small but not the biggest.

[bigboi8225]

you could go thru the muscle if not big enough, just use those needle but do not go all the way in just leave it a little sticking out.

[DamonPhoniex]

I also love using www.spotinjections.com They usually have good info about spot injects (hence the name)

[swing lo]

^ very informative!!!! thanks!

Hey what about if I inject into the middle head of the delt at an angle since the needle is longer that way I can be sure I wont go through the muscle. I ask this because I don't want any oil coming out if I only stick the needle in half way.

[InkFiend33]

i use 23 1 1/4 and just like the other guys say... just dont push it in all the way..... but little smaller 25 always feels nicer.... i just have not ordered any yet....

[swing lo]

Well I just finished another shot and I stuck the pin all the way in my quad. I'm not small in the quads but how can you tell if you went through the muscle? What would happen if the gear went through the muscle? I mean, the leg is made up mostly of muscle and I really hope I haven't done these last 3 shots and they gear didn't go into my quad. Next time i won't go all the way in with it but can someone reassure me on this please?

Again, I'm using a 23G 1 1/4

[rossalini]

Well I just finished another shot and I stuck the pin all the way in my quad. I'm not small in the quads but how can you tell if you went through the muscle? What would happen if the gear went through the muscle? I mean, the leg is made up mostly of muscle and I really hope I haven't done these last 3 shots and they gear didn't go into my quad. Next time i won't go all the way in with it but can someone reassure me on this please?

Again, I'm using a 23G 1 1/4


trust me you didnt go through your quad muscle with 1 1/4" pin unless you are extremely skinny...relax man im sure you got it in there just fine;)

[swing lo]

Cool cause I'm going to go ahead and keep injecting in my quads and then start with the delt only using half the needle. I just want to know I'm doing this right guys. Thanks for the feedback.

[thym43]

JUst for grins, What compounds are you injecting??

[swing lo]

Test E and EQ

500mg TEST
400mg EQ

[CountVascular]

25g is the way to go...it also takes a little longer to inject...slow that puppy right up....When I grow up and stop being the joker, I am going to try my lats, but I want kev to man the fuck up and do it first..... :D

[mxcx]

25g 5/8'' is what I been using for delts...and me to some day im gonna try the lats they just seem painful and awkward.

[InkFiend33]

the wings are big enough to sink some pin into... but wow... cant feel good there.... count try it out and let me know how it goes.,.....

[Big A]

I also love using www.spotinjections.com They usually have good info about spot injects (hence the name)

No they don't. That site has some fucking dangerous information in it.

Go to www.howtodoinjections.com for correct info.

[thym43]

I can say this from my own experience, I can't use a needle that's too long and just put it in part of the way it's way to hard for me to control the depth. I also know from a couple of very painful experiences that needle depth is WAY important when I have used poor gauge and poor length I have had leakage and a very painful reaction, swelling, welts, reddness the whole deal. Now I tend to listen to Big A on tall of these matters. Right tool for the right job, you know?

[swing lo]

^ I hear ya!!! note taken.

[ROCK157]

I had some 1 and a half inch needles (before I got the 25g 1inch needles) and what I did was cut the cap off (shorten) and shoot with the cap on. This only allows you to go as deep as you need without using the whole length of the needle. That ways I don't waste the needles and I get the right length custom to fit just right. Make sure you swab it (the cap) with alcohol first to make sure it's all sterile. My 2 cents.:D

[soldierb11]

i use 23 1 1/4 and just like the other guys say... just dont push it in all the way..... but little smaller 25 always feels nicer.... i just have not ordered any yet....

I use 23G as well but am thinking about ordering some 25's for next cycle.
But i wonder if the 25's are a bit small for the oil to pass thru easily, any guys use the 25??

[mxcx]

I use 23G as well but am thinking about ordering some 25's for next cycle.
But i wonder if the 25's are a bit small for the oil to pass thru easily, any guys use the 25??

25s are good just put your pin in a ziplock bag and run it under hot water to heat the oil it will help the it flow better.